Attwood Sportline Glove Boxes Manual do Utilizador descarregar pdf

TOOLS REQUIRED FOR MOUNTING:

1. Drill and suitable bits

2. Six (6) #8 screws

3. Saber saw with appropriate saw blades

4. Prick-punch

5. Soft lead pencil

Standard and Sportline

Glove Boxes

2638, 2715, 2716

Installation Instructions

SAVE THESE INSTRUCTIONS

Form Number 69144 Rev. B 03-11

FEATURES:

Attwood glove boxes are specially designed for those who

enjoy a more sport-styled look. The Sportline glove box is a

matched companion to the Sportline steering wheel.

These glove boxes are made of rugged black plastic. The door

incorporates a marine locking latch. Located inside the door

are two drink holders that will help keep your beverages in

place when the door is open.

INSTALLATION INSTRUCTIONS:

1. Cut out glove box template.

2. With a soft lead pencil, blacken behind sheet compartment

hole cut line and the four corner saber saw cut drill holes.

3. Tape template in your desired location. Leave room for over-

all glove box dimensions as indicated on your template.

4. Mark the center of the four corner holes with prick-punch.

5. Drill 3/8" diameter starting holes and cut away on inside line.

6. Trace over compartment hole cut line connecting the four

3/8" diameter holes in each corner as shown and remove

template. Carefully saber saw along the cut line starting the

saw blade at one of the corner holes.

7. Install glove box and hold in position while marking the six

screw holes as indicated on illustration inside template.

Remove glove box.

8. Drill the six mounting screw holes where prick-punch marks

are located.

a. If wood or self-tapping screws are used, drill 1/8" diameter

hole into dash.

b. If screws with nuts are used, drill 3/16" diameter holes

through dash.

9. Install glove box into mounting hole and secure with #8

screws.

CAUTION:

Do not use acetone or other solvents on box or door.

1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com

(CUT & DETACH FROM INSTRUCTIONS)

TOP OF GLOVE BOX DOOR

TOP OF MOUNTING FLANGE

DRINK HOLDERS

1/2" FINGER ROOM

CUT LINE

CENTER LINE

MOUNTING HOLES

6 LOCATIONS

FOR LIGHT

IF REQUIRED

TOP

3/8" DIAMETER HOLE FOR

SABRE SAW (ALL FOUR CORNERS)

GLOVE BOX

INSTALLATION TEMPLATE

______________ _____________________ ____ _____________________________

BOTTOM

Standard and Sportline 1
Glove Boxes 1

Resumo do Conteúdo

Página 1 - Glove Boxes

TOOLS REQUIRED FOR MOUNTING:1. Drill and suitable bits2. Six (6) #8 screws3. Saber saw with appropriate saw blades4. Prick-punch5. Soft lead pencilSta

Comentários a estes Manuais

Sem comentários

Attwood Sportline Glove Boxes Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Hardware Attwood Sportline Glove Boxes. Attwood Sportline Glove Boxes User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Attwood Sportline Glove Boxes